Professional Articles

In-depth technical articles on silicon-based passive devices, product applications and industry trends from Launchip.

Home / Professional Articles

Engineering Selection of High-Reliability Silicon Capacitors: Rated Voltage, Breakdown Voltage, TCC and DC Bias Characteristics

In near-die decoupling for AI/HPC high-compute chips, broadband AC coupling in high-speed optical modules and high-voltage pulse circuits, 3D silicon capacitors are an important complement to conventional multilayer ceramic capacitors (MLCCs) at critical high-frequency, high-density and advanced-packaging locations. Drawing on Launchip Technology's proprietary 3D deep-trench silicon capacitor technology platform and on specification data for volume-production part numbers, this article provides a standardized selection reference covering **the distinction between rated voltage and breakdown voltage during device selection**, **part-level matching of the capacitance temperature coefficient (TCC) to the operating temperature**, **calculation of effective capacitance under DC bias**, and **engineering evaluation criteria for multi-terminal low-parasitic designs, broadband coupling and high-voltage pulsing**.

I. From Ferroelectric Ceramics to Wafer-Level 3D Deep Trench: Matching Platform Capability to Part-Level Specifications

In Class II ferroelectric ceramic capacitors (such as the X5R and X7R families), which are widely used for high-capacitance-density decoupling and miniaturized coupling, devices often show a pronounced drop in effective capacitance when DC bias, wide temperature excursions and long-term operation are superimposed.

Launchip Technology (Launchip) builds on semiconductor wafer fabrication processes, combining Bosch high-aspect-ratio deep trench etching (DTC), high-dielectric-constant (high-k) inorganic insulating dielectrics and MIM/DTC structures to establish a 3D silicon capacitor portfolio covering four families: HC high-capacitance, HF high-frequency, XF ultra-high-frequency and HV high-voltage. Overall platform capability spans capacitance of 0.1 pF – 2 μF, operating voltage of 0.7 V – 1000 V, withstand voltage of 3 V – 2500 V, a maximum frequency of 110 GHz and a recommended temperature range of -55°C ~ 150°C, with insulation resistance > 1 GΩ and leakage current < 1 nA at rated voltage.

Platform figures represent the overall coverage span across multiple process sequences; when moving into circuit derating design and simulation evaluation for a specific project, the latest datasheet for the complete target part number, with its full suffix, is the basis for final device release.

II. Voltage Selection: Distinguishing Rated Voltage from Breakdown Voltage (BV)

When reviewing silicon capacitor catalogs and datasheets, the first derating principle is to verify rated operating voltage (Rated Voltage) and breakdown / withstand voltage (Breakdown Voltage, BV) separately.

1. Physical Definitions of the Two Voltage Parameters

  • Breakdown / withstand voltage (Breakdown Voltage, BV): the minimum breakdown voltage under specified test conditions and leakage-current criteria, used to characterize the withstand-voltage class of process platforms with different dielectric film thicknesses (the three-digit withstand-voltage codes in Launchip part-number nomenclature, such as 003, 004, 009, 011 and 030, correspond to this field).
  • Rated operating voltage (Rated Voltage): the long-term continuous operating voltage limit specified in the datasheet after accounting for the target operating temperature, the time-dependent dielectric breakdown (TDDB) long-term lifetime model and reliability requirements.

2. Voltage Parameters of Representative Launchip Volume-Production Part Numbers

Taking selected Launchip volume-production part numbers as examples, the correspondence between rated operating voltage and breakdown withstand voltage in the datasheets is as follows:

Product familyPart number / configurationNominal capacitanceRated operating voltage (Rated Voltage)Breakdown / withstand voltage (Breakdown Voltage)Typical application
HC high-capacitanceLHC205SA8K003ZS / ZC (49 terminals)2 μF1.2 VDC≥ 3 VDCNear-die decoupling of low-voltage core supply rails in AI / GPU / SoC
HC high-capacitanceLHC105SA4K0032 (0204, 2 terminals)1 μF1.35 VDC≥ 3 VDCBroadband decoupling of core power rails
HC high-capacitanceLHC104SA2K0047 (0201, 7 terminals)100 nF1.2 VDC≥ 4.0 VDCNear-die low-inductance decoupling / advanced packaging integration
XF ultra-high-frequency01005 22 nF 9 V volume-production product22 nF3.3 VDC≥ 9 VDCCoupling / bypass in compact high-speed optical modules
XF ultra-high-frequencyLXF223SA2K0112 (0201)22 nF6 V≥ 11 VCoupling in high-speed optical communication and SerDes signal chains

In actual power-rail design (including the HC high-capacitance family at 0.7 – 48 V, the HF high-frequency family at 15 – 200 V, the XF ultra-high-frequency family at 2.5 – 24 V and the HV high-voltage family at a maximum operating voltage of 1000 V), selection is performed against the rated operating voltage and transient conditions of the complete target part number, ensuring that steady-state DC bias, switching ripple and high-di/dt transient overshoot spikes remain within the rated operating envelope.

III. Temperature and Reliability Matching: TCC Behavior, Integration Form Factors and Automotive-Grade Validation

1. Capacitance Temperature Coefficient (TCC) and the Total Capacitance Budget

The temperature coefficient of a silicon capacitor varies with dielectric material and capacitance-density class; low-capacitance high-frequency products generally show a lower temperature coefficient, while high-capacitance products show a relatively larger one:

  • Overall temperature stability: the TCC of most Launchip silicon capacitor products is < 70 ppm/°C (considering the temperature term alone, estimated by linear approximation with 25°C as the reference: when |TCC| ≤ 70 ppm/°C, the temperature-term change is approximately no more than 0.88% on heating to +150°C and no more than 0.56% on cooling to -55°C).
  • Verification against specific part numbers: the temperature coefficient differs between part numbers and is governed by the respective datasheet; for example, the high-capacitance part numbers LHC104SA2K0047 (100 nF), LHC205SA8K003ZC (2 μF) and LHC205SA8K003ZS (2 μF) carry a specification limit of ≤ 300 ppm/K. The engineering capacitance budget is calculated from the initial tolerance, TCC limit and bias behavior of the part number in question.

2. Operating Temperature Range and Three Integration and Assembly Configurations

  • Matching the operating temperature to the part number: the family-level recommended temperature range for Launchip products spans -55°C ~ 150°C (for example, the 01005 22 nF optical-communication specification reaches a maximum operating temperature of 150°C, while LHC104SA2K0047, LHC105SA4K0032 and LHC205SA8K003ZC / ZS have a rated operating temperature of -55°C ~ 125°C); selection is aligned directly with the datasheet of the target part number. Compared with Class II ferroelectric ceramics, silicon capacitors show little intrinsic dielectric capacitance aging, so long-term high-reliability design centers on reserving margin for high-temperature operating life (HTOL), resistance to soldering heat and parameter behavior after assembly-induced mechanical stress.
  • Surface-mount, backside-attach and substrate-embedded paths: Launchip silicon capacitors cover three integration locations — package substrate embedding (Embedded / substrate-embedded capacitance), chip backside attach / near-die integration and PCB surface mounting — which helps place the device close to the SoC die through an ultra-thin profile and optimize the Z-axis power delivery path. Engineering release requires the electrode suffix and thickness specification to be matched to the assembly process:
    • Taking the 49-terminal 2 μF platform (base demonstration part number LHC205SA8K003Z, typical thickness 75 μm) as an example, LHC205SA8K003ZC uses a Cu electrode structure (1.13 × 0.99 mm, Cu of approximately 18 μm), while LHC205SA8K003ZS uses a Cu/Ni/Sn bump structure (1.12 × 0.98 mm, 22 μm / 3 μm / 25 μm);
    • the 7-terminal 100 nF part number LHC104SA2K0047 (0.65 × 0.35 mm) has a standard thickness of 70 ± 10 μm (customizable down to 50 μm), and all variants are available in tape-and-reel, blue film and wafer form.

3. Automotive-Grade Reliability Validation and Volume-Production Screening System

The Launchip 49-terminal 2 μF part number LHC205SA8K003ZS has passed automotive-grade reliability validation conducted by Centre Testing International (CTI) in accordance with AEC Q200E-2023 (certificate number: A2260104174101E, issue date: 2026-05-26, covering the 13 specified test requirements; the associated test data show a Pass result in the 125°C / 1.5 V / 1000 hours high-temperature operating life test on 77 units, in the three-reflow resistance-to-soldering-heat test at 260 ± 5°C, and in the 2 mm / 60 s board-bend test).

For manufacturing and outgoing quality control, the Launchip R&D, test and certification center and production lines in Anting, Jiading, Shanghai carry out 100% CP testing, CHAR, PAT, GDBN, Stack Mapping, RS (Rejection Selection, the proactive removal of performance-marginal devices to improve final shipment consistency), 100% six-sided OM optical inspection and IR inspection.

IV. DC Bias, Multi-Terminal Low Parasitics and High-Frequency / High-Voltage Application Considerations

1. DC Bias: Calculating Effective Capacitance from Quantified Metrics

Launchip 3D silicon capacitors are only weakly affected by DC Bias and maintain good capacitance stability within the rated operating voltage range:

  • 7-terminal part number LHC104SA2K0047 (100 nF, rated operating voltage 1.2 VDC): maximum capacitance voltage variation of 1.9% / VDC;
  • 2-terminal part number LHC105SA4K0032 (1 μF, rated operating voltage 1.35 VDC): at 25°C, capacitance changes by a maximum of approximately 1.7% as the voltage rises from 0 V to 1.35 V.

Design teams can therefore plan decoupling schemes directly on the true effective capacitance at the target bias, raising area utilization within constrained package space.

2. Multi-Terminal Product Ladder and PDN Co-Simulation

Multi-terminal silicon capacitors shorten the local current loop and reduce parasitic inductance by adding supply and return paths and by interleaving VDD / VSS terminals. The Launchip HC family forms a clear multi-terminal product ladder:

  • 2 terminals, LHC104SA2K0042 (100 nF, thickness approximately 100 μm): typical ESR approximately 90 mΩ, ESL ≤ 120 pH;
  • 7 terminals, LHC104SA2K0047 (100 nF, 4 VDD / 3 VSS, thickness 70 ± 10 μm): typical ESR 16 mΩ, ESL ≤ 15 pH;
  • 12 terminals, LHC354SA7K003C (350 nF, 0.64 × 0.50 mm, typical thickness 75 μm): ESR 10.2 mΩ, ESL 7.81 pH;
  • 49 terminals, LHC205SA8K003ZC / ZS (2 μF, ESD HBM 6 kV): typical ESR 3 mΩ, ESL ≤ 2.9 pH.

Because system-level PDN behavior depends jointly on device capacitance, placement or embedding location, substrate via interconnect and VDD / VSS layout, engineering integration can draw on the S-parameter, SPICE or RLC models supplied by Launchip to complete system-level impedance optimization in simulation platforms such as HFSS / ADS.

3. Broadband AC Coupling in High-Speed Optical Modules

For the high-frequency coupling and bypass requirements of 800G and 1.6T / 3.2T high-speed optical modules and high-speed SerDes, the Launchip XF ultra-high-frequency family offers several volume-production configurations, covering:

  • 01005 ultra-compact package (0.42 × 0.22 mm, typical thickness 100 μm): includes the 10 nF / 11 V and 22 nF / 9 V volume-production configurations and a 22 nF / 11 V part for high-speed optical modules; technical data show that the 01005 22 nF 9 V product has typical insertion loss of 0.1 / 0.15 / 0.25 / 0.3 dB at 20 / 40 / 67 / 110 GHz, respectively, and a typical return loss of ≥ 13 dB at 110 GHz;
  • 0201 standard package: includes the 10 nF / 22 nF / 47 nF (11 V) volume-production configurations (such as LXF223SA2K0112, which has complete S-parameters up to 67 GHz);
  • four-terminal dual-element capacitor array (such as LXF103AA1K0112 10 nF and 01005 / 0201 22 nF arrays): the two internal capacitors are fully isolated electrically, which saves mounting area and improves the soldering yield of small single devices while allowing precise control of trace spacing on high-speed differential signal lines.

Broadband characterization up to 110 GHz demonstrates ample high-frequency design margin and adaptability to forward-looking high per-lane data-rate roadmaps; for channel design, measured .s2p parameters of the relevant part number are used with board-level pad and via transition structures in joint signal integrity (SI) simulation.

4. High-Voltage Pulse and Power Buffering Evaluation

For LiDAR pulse drivers, high-voltage DC/DC conversion and surge protection, the Launchip HV high-voltage family provides standard platform capability with a maximum operating voltage of 1000 V and a maximum withstand voltage of 2500 V. Beyond verifying rated operating voltage and withstand-voltage margin, a specific selection also evaluates the single-pulse energy-storage requirement (E = (1/2) · C · V²), the peak current and dV/dt slope at narrow pulse widths, the ESR temperature rise at repetitive pulse rates, and high-voltage pad spacing and insulation coordination.

V. Five-Step Quick Reference for Project BOM Release

StepVerification stageSelection confirmation points
Step 1Lock the complete suffixed part numberConfirm the complete part number and latest datasheet revision, covering family, capacitance, structure type (surface-mount / top-bottom electrode / array), size, withstand voltage, terminal count and electrode material (for example ZC Cu electrodes or ZS CuNiSn bumps).
Step 2Re-verify the rated operating voltageCheck the combined peak of steady-state power-rail bias, ripple and transient overshoot against the datasheet Rated Voltage, and confirm that the insulation resistance and leakage current requirements are met at the operating voltage.
Step 3Align temperature and TCCConfirm the operating temperature class (for example -55°C ~ 125°C or -55°C ~ 150°C) and the corresponding TCC specification from the datasheet of the target part number.
Step 4Effective capacitance and simulation validationCalculate the effective capacitance from the measured DC Bias rate of change; use the S-parameter / SPICE / RLC model of the relevant part number to complete joint PI / SI simulation or pulsed-power calculation.
Step 5Process and reliability alignmentAlign thickness and pad-process requirements for PCB surface mounting, chip backside attach or substrate-embedded capacitance; for automotive and high-reliability projects, coordinate validation reports and application-level testing as required.

Technical Documentation and Engineering Collaboration Support

Launchip Technology provides standardized selection and project-specific custom development around capacitance density, voltage class, ultra-thin thickness and multi-terminal array layout, together with S-parameter / SPICE / RLC models, joint HFSS / ADS simulation, PI / RF co-design, SEM / FIB failure analysis and closed-loop 8D engineering support with an initial response within 48 hours.

Detailed electrical parameters, POD dimensional tolerances and recommended pad geometries for each product are governed by the latest official datasheet for the specific part number. Technical documents are available in the “Documentation Download” section of the official website; alternatively, “Technical Inquiry” provides direct access to the Launchip Technology application engineering team for selection support and engineering samples.

Collaboration and Contact

Talk with our application engineering team about 3D silicon capacitors, silicon inductors and silicon resistors for AI computing, optical communications, LiDAR and other demanding applications.

Contact Us
Technical DocumentationTechnical DocumentationEngineering SamplesEngineering SamplesApplication ValidationApplication ValidationProject SupportProject Support