High-Voltage

Product Center

Silicon capacitors, silicon resistors and silicon inductors, with customization from standard selection to dimensions, parameters and packaging.

Home / Products / Silicon Capacitors / High-Voltage

High-Voltage

High-voltage upper/lower-electrode silicon capacitors for 150–2500 V damping, absorption, and protection applications. Capacitance is 1.5 pF–1 nF, and the upper/lower electrode structure achieves high-voltage capability in an ultra-small footprint. A single device combines filtering and protection: a 100 V device can absorb > 8 kV ESD pulses, replacing a TVS diode plus filter capacitor; it also provides effective damping on SiC/GaN high-dv/dt switching nodes, saving PCB space.

  • Withstand voltage 150–2500 V
  • Capacitance 1.5 pF–1 nF
  • Filtering + protection in one device
  • > 8 kV ESD absorption
  • SiC/GaN damping
High-Voltage

Specifications

1.5pF–1nF · 150–2500V · 26.5GHz

ParameterValue
Capacitance range1.5 pF–1 nF
Withstand voltage150–2500 V
Max frequency26.5 GHz
Operating temperature−55 to +150°C
Device typeupper/lower electrode
TCC≤ 70 ppm/K
Leakage current< 1 nA @ UR
Agingcapacitance change < 1% @ 125°C/1000 h

Specification Table

Supports everything from standard selection to size, parameter and package customization.

ModelCap (pF)StatusBV (Vdc)Size Code (mil)POD Dimension (mm)Typ. Thickness (μm)
LHV102WB6K15011000MP15018*18/20*200.5*0.5100
LHV1R5WBDK10211.5MP100038*12/54*201.35*0.5200
LHV2R0WBDK10212MP100038*12/54*201.35*0.5200
LHV2R5WBDK10212.5MP100038*12/54*201.35*0.5200
LHV3R0WBDK10213MP100038*12/54*201.35*0.5200
LHV3R5WBDK10213.5MP100038*12/54*201.35*0.5200
LHV4R0WBDK10214MP100038*12/54*201.35*0.5200
LHV5R0WBDK10215MP100038*12/54*201.35*0.5200
LHV6R0WBDK10216MP100038*12/54*201.35*0.5200
LHV7R0WBDK10217MP100038*12/54*201.35*0.5200
LHV150WB9K102115MP100044*44/50*501.27*1.27300
LHV280WBBK102128MP100060*60/68*681.73*1.73300
LHV330WBBK122133MP120060*60/68*681.73*1.73300

Applications

SiC/GaN switching-node damping absorption (> 10 kV/us)

ESD protection for sensor detection chips

Damping and oscillation absorption in high-voltage power modules

48V domain controller DC-DC / OBC / DC-DC damping

Short-range LiDAR

FAQ

FAQ

Can silicon capacitors be mounted directly on a chip?

Yes. Silicon capacitors can be mounted on the ball side or backside of a SoC, connecting directly to the chip without PCB routing and greatly reducing power-loop inductance. They are an effective PDN decoupling solution and can also be co-packaged with the chip.

How high a temperature can silicon capacitors withstand? What about long-term reliability?

They can operate at up to 150 °C. The 49-terminal 2 μF product is AEC-Q200 qualified. Leakage current is < 1 nA at RVDC, the capacitance voltage coefficient is < 0.1%/V, and capacitance aging is negligible.

What is the upper frequency limit of silicon capacitors?

Verified operation extends to 110 GHz (01005 22 nF product). Insertion loss at high frequencies is significantly better than conventional ceramic capacitors, making the parts suitable for 1.6T / 3.2T optical modules, 6.4T NPO and other ultra-high-speed applications.

Why can silicon capacitors achieve such high capacitance in such a small package?

The 3D deep-trench structure greatly increases the effective electrode area within a limited footprint. The latest 01005 package has achieved 22 nF / 11 V, more than double the previous 10 nF generation.

What is the essential difference between silicon capacitors and MLCCs?

Silicon capacitors use a semiconductor wafer-level process to form a three-dimensional deep-trench structure in a silicon substrate; MLCCs are ceramic multilayer sintered devices. As a result, silicon capacitors offer significantly lower ESR/ESL, better capacitance accuracy and batch consistency, and a thinner profile that can be co-packaged with the chip. Their capacitance range is smaller and unit cost is higher. The two are complementary, not a simple replacement.

Do you have automotive-grade products?

The full product line covers AEC-Q200 certification requirements. Silicon capacitors, inductors, and resistors all have automotive-grade capability and can be used in automotive electronics and LiDAR.

Can you support system-level joint validation?

Yes. Launchip can work with your application engineering team to build a test platform and evaluate device performance in the real system. This is a key way we advance new applications.

How do I request samples?

Contact the relevant sales owner directly (different contacts for optical communications, LiDAR, and high-frequency power / chip silicon capacitors).

Collaboration and Contact

Talk with our application engineering team about 3D silicon capacitors, silicon inductors and silicon resistors for AI computing, optical communications, LiDAR and other demanding applications.

Contact Us
Technical DocumentationTechnical DocumentationEngineering SamplesEngineering SamplesApplication ValidationApplication ValidationProject SupportProject Support